Skip to content

Instantly share code, notes, and snippets.

@atuline
Last active October 12, 2022 21:03
Show Gist options
  • Save atuline/9ea9b277c1e9be341a41 to your computer and use it in GitHub Desktop.
Save atuline/9ea9b277c1e9be341a41 to your computer and use it in GitHub Desktop.
Demoreel100 with a button
/*
Title: DemoReel100 with Button
By: Mark Kriegsman
Button added by: Andrew Tuline
- FastLED library (get 3.1) from https://github.com/FastLED/FastLED
- JChristensen's Button Library from https://github.com/JChristensen/Button
*/
#include "FastLED.h"
#include "Button.h" // Button library. Includes press, long press, double press detection.
// FastLED "100-lines-of-code" demo reel, showing just a few
// of the kinds of animation patterns you can quickly and easily
// compose using FastLED.
//
// This example also shows one easy way to define multiple
// animations patterns and have them automatically rotate.
//
// -Mark Kriegsman, December 2014
#if FASTLED_VERSION < 3001000
#error "Requires FastLED 3.1 or later; check github for latest code."
#endif
// Pushbutton pin definition
const int buttonPin = 6; // Digital pin used for debounced pushbutton
// int buttonState = 0;
// int lastButtonState = 0;
Button myBtn(buttonPin, true, true, 50); // Declare the button
#define DATA_PIN 12
#define CLK_PIN 11
#define LED_TYPE WS2812
#define COLOR_ORDER GRB
#define NUM_LEDS 10
CRGB leds[NUM_LEDS];
#define FRAMES_PER_SECOND 120
uint8_t max_bright = 64;
void setup() {
Serial.begin(57600);
delay(3000); // 3 second delay for recovery
FastLED.addLeds<LED_TYPE,DATA_PIN,COLOR_ORDER>(leds, NUM_LEDS).setCorrection(TypicalLEDStrip);
//FastLED.addLeds<LED_TYPE,DATA_PIN,CLK_PIN,COLOR_ORDER>(leds, NUM_LEDS).setCorrection(TypicalLEDStrip);
// set master brightness control
FastLED.setBrightness(max_bright);
}
// List of patterns to cycle through. Each is defined as a separate function below.
typedef void (*SimplePatternList[])();
SimplePatternList gPatterns = {rainbow, rainbowWithGlitter, confetti, sinelon, juggle, bpm };
uint8_t gCurrentPatternNumber = 0; // Index number of which pattern is current
uint8_t gHue = 0; // rotating "base color" used by many of the patterns
void loop()
{
// Call the current pattern function once, updating the 'leds' array
gPatterns[gCurrentPatternNumber]();
// send the 'leds' array out to the actual LED strip
FastLED.show();
// insert a delay to keep the framerate modest
FastLED.delay(1000/FRAMES_PER_SECOND);
// do some periodic updates
EVERY_N_MILLISECONDS( 20 ) { gHue++; } // slowly cycle the "base color" through the rainbow
// EVERY_N_SECONDS( 10 ) { nextPattern(); } // change patterns periodically
readbutton(); // Button press increases the ledMode up to last contiguous mode and then starts over at 0.
}
#define ARRAY_SIZE(A) (sizeof(A) / sizeof((A)[0]))
void nextPattern()
{
// add one to the current pattern number, and wrap around at the end
gCurrentPatternNumber = (gCurrentPatternNumber + 1) % ARRAY_SIZE( gPatterns);
}
void rainbow()
{
// FastLED's built-in rainbow generator
fill_rainbow( leds, NUM_LEDS, gHue, 7);
}
void rainbowWithGlitter()
{
// built-in FastLED rainbow, plus some random sparkly glitter
rainbow();
addGlitter(80);
}
void addGlitter( fract8 chanceOfGlitter)
{
if( random8() < chanceOfGlitter) {
leds[ random16(NUM_LEDS) ] += CRGB::White;
}
}
void confetti()
{
// random colored speckles that blink in and fade smoothly
fadeToBlackBy( leds, NUM_LEDS, 10);
int pos = random16(NUM_LEDS);
leds[pos] += CHSV( gHue + random8(64), 200, 255);
}
void sinelon()
{
// a colored dot sweeping back and forth, with fading trails
fadeToBlackBy( leds, NUM_LEDS, 20);
int pos = beatsin16(13,0,NUM_LEDS);
leds[pos] += CHSV( gHue, 255, 192);
}
void bpm()
{
// colored stripes pulsing at a defined Beats-Per-Minute (BPM)
uint8_t BeatsPerMinute = 62;
CRGBPalette16 palette = PartyColors_p;
uint8_t beat = beatsin8( BeatsPerMinute, 64, 255);
for( int i = 0; i < NUM_LEDS; i++) { //9948
leds[i] = ColorFromPalette(palette, gHue+(i*2), beat-gHue+(i*10));
}
}
void juggle() {
// eight colored dots, weaving in and out of sync with each other
fadeToBlackBy( leds, NUM_LEDS, 20);
byte dothue = 0;
for( int i = 0; i < 8; i++) {
leds[beatsin16(i+7,0,NUM_LEDS-1)] |= CHSV(dothue, 200, 255);
dothue += 32;
}
}
void readbutton() { // Read the button and increase the mode
myBtn.read();
if(myBtn.wasReleased()) {
nextPattern();
}
} // readbutton()
@SpechtacularDave
Copy link

For the sinelon and juggle functions, this code has a bug that causes the micro-controller to freeze on the Fastled 3.1.8 release. Change NUM_LEDS to NUM_LEDS-1 for their beatsin16 functions.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment